Set Project look 2: Aurora digital process

 The first step in creating this design was to draw it on a maquette using a felt ink pen and scanning it and transferring it onto Photopea which is a digital software.

The second step was to "clean" the unnecessary lines overlapping the dress and body using white colour as a rubber. Moving on I took the brush tool and chose a hue of red. I then chose the round noisy marker and adjusted the opacity to 59% and size 76px and started working with it. I then chose an orange hue and 76px again and opacity 59% and went over it.

I then began working on the top part but with orange first.

I then changed the size to 35px for both colours and continued "dotting" onto the design. I then continuously changed the opacity to 46% and 27% and the to 87px size still using the same brush tool which was round noisy marker. I then began pressing onto the design made with 10% opacity and 157px size orange and red to create contrast. I then switched to hard mechanical for the outline of the dress and 6px size and 77% opacity of another colour which was in between red and orange.

This was the effect at the bottom i was achieving by the dotting method. 

For the bag i used the wet marker 01 from the brush tool and opacity 85% and 23 px size for the first layer of the colour. Using the same tool i switched the opacity to 95% and switched colours and then changed the opacity gain to 100% for layer 3 of fringes.

For the shoes i used the tool brush using the sketching medium tool to 192px size and opacity 100%. 

Overall this was fun doing as it was amusing how well the colours blended together and the anticipation for the end result was thrilling.